Your Quote Request  |  Checkout   


Where to find MORTAR HAND TROWEL in Beaver Falls

Image for reference only
Actual item may look different
Click on image for larger view

Model: 11744
4 Hour: $2.00
Daily: $3.00
Weekly: $4.25
  • 9-1/2" LONG : 4-1/2" HEAL
  • Shovel a scoop of mortar from the wheel barrow onto a piece of scrap wood or mortar board.
  • Slice into the end of the mortar with a pointed trowel. Do this as you would with butter, lifting the mortar level to the ground. At this point you should only have a trowel sized amount of mortar.
  • Place the long end of the trowel onto the area you wish to apply mortar.
  • Turn the trowel 180 degrees and snap the mortar over the spot.
  • Move the trowel along the center to even the mortar along the area.
  • Tap the unit (brick, rocks or whatever you are connecting) with the end of the trowel.
  • Verify that the unit is level and aligned properly.
  • Cut off the excess mortar with the edge of the trowel.
  • Layer the mortar on the bricks or rocks themselves to a 1/2-inch or more thickness than desired before sticking them to their adjoining unit. The excess will come out when put into place.
  • Press down on all of the edges.
  • Wipe the unit's surface to keep it from becoming discolored from the mortar.
  • Allow the mortar to set until it becomes gray.
  • Scrape off any excess mortar with the trowel.
Add of the above items to my quote request
for a period of   4 hour(s)   day(s)   week(s)  

 * Prices are subject to change. Taxes and other fees are not shown in this price estimate.

* Please call us with any questions about our mortar hand trowel rentals in Beaver Falls PA metro area.